Food Habits

How long does it take for bacon to cook in the oven at 375?

approximately 18-23 minutes

How long does bacon take to cook in the oven at 400?

18-20 minutes

How long does bacon take to cook at 350?

10 to 15 minutes

What is the best temp to bake bacon?

400 Degrees F.

How long should you cook bacon in the oven at 350?

18-20 minutes

How long does it take to fully cook bacon in the oven?

Preheat the oven to 350 degrees F (175 degrees C). Line a baking sheet with aluminum foil. Arrange the bacon in a single layer on the prepared sheet with the edges touching or slightly overlapping. Bake in the preheated oven to desired degree of doneness, 10 to 15 minutes

How long does it take for bacon to cook in the oven at 325?

Arrange the bacon on top of the rack so they’re evenly spaced apart and don’t overlap. Bake at 375xb0F (191) for 15 minutes, then carefully flip over and cook until the bacon is fully cooked, golden in color and crisp, about 8 to 10 minutes depending on the thickness

How long does bacon take to cook in the oven at 450?

10 to 20 minutes

How long do I cook bacon at 425?

Preheat oven to 425 degrees. Line a rimmed baking sheet with foil or parchment paper. Arrange the bacon slices in a single layer on the baking sheet being sure not to overlap the edges. Transfer the baking sheet to the oven and bake for 12-15 minutes or until the desired degree of doneness.

How long does it take to cook bacon at 375 in the oven?

How long to cook bacon in the oven at 375xb0F (191) Bake for approximately 18-23 minutes.

How long does it take to cook bacon at 350 in the oven?

Preheat the oven to 350 degrees F (175 degrees C). Line a baking sheet with aluminum foil. Arrange the bacon in a single layer on the prepared sheet with the edges touching or slightly overlapping. Bake in the preheated oven to desired degree of doneness, 10 to 15 minutes

How long does it take bacon to cook in the oven?

Preheat the oven to 325 degrees F, line a baking sheet with parchment paper (no aluminum foil is needed for reheating), and arrange the bacon slices in a single layer. Cook until hot and just starting to sizzle, about 10 minutes

How long should you bake bacon at 375?

How long to cook bacon in the oven at 375xb0F (191) Bake for approximately 18-23 minutes.

How do you cook bacon in the oven at 400?

Preheat the oven to 350 degrees F (175 degrees C). Line a baking sheet with aluminum foil. Arrange the bacon in a single layer on the prepared sheet with the edges touching or slightly overlapping. Bake in the preheated oven to desired degree of doneness, 10 to 15 minutes

How long does it take to bake bacon at 425?

Instructions

Preheat oven to 400xb0F. If desired, line pan with foil and/or parchment paper for easy clean up.

Arrange bacon in a single layer on a rimmed baking sheet.

Bake for 18-20 minutes or until bacon is crisp. Thick cut bacon will need extra time.

Transfer to paper towel lined plate.

Dec 1, 2021

How long does it take to cook bacon in the oven at 375 degrees?

Preparation. Heat the oven to 450 degrees. Arrange the bacon in a single layer on 2 aluminum foil-lined rimmed baking sheets, or, for extracrispy bacon, arrange on 2 wire racks set over 2 foil-lined rimmed baking sheets. Bake until the bacon is browned and starts to ripple, or to desired doneness, 10 to 20 minutes

What temperature do I set the oven to cook bacon?

Preheat the oven to 325 degrees F, line a baking sheet with parchment paper (no aluminum foil is needed for reheating), and arrange the bacon slices in a single layer. Cook until hot and just starting to sizzle, about 10 minutes

How long does it take for bacon to cook in the oven?

Preparation. Heat the oven to 450 degrees. Arrange the bacon in a single layer on 2 aluminum foil-lined rimmed baking sheets, or, for extracrispy bacon, arrange on 2 wire racks set over 2 foil-lined rimmed baking sheets. Bake until the bacon is browned and starts to ripple, or to desired doneness, 10 to 20 minutes

How do you know when bacon is fully cooked in the oven?

Bacon is considered fully cooked when the meat changes color from pink to brown and the fat has had a chance to render out. It’s fine to remove the slices from the heat when they’re still a bit chewy, but bacon is usually served crisp.

How long should bacon be in the oven at 400?

You will need to bake bacon at 400xb0F for about 20 minutes.

Preheat oven to 400xb0F per the recipe below.

Place bacon on the prepared rimmed baking sheet.

Bake until bacon reaches desired level of crispiness (no need to flip it), about 20 minutes.

Remove bacon from the pan place on paper towels to drain grease.

Dec 1, 2021

How long should I cook my bacon in the oven?

10 to 15 minutes

What temp should I bake bacon in the oven?

Heat the oven to 450 degrees. Arrange the bacon in a single layer on 2 aluminum foil-lined rimmed baking sheets, or, for extracrispy bacon, arrange on 2 wire racks set over 2 foil-lined rimmed baking sheets. Bake until the bacon is browned and starts to ripple, or to desired doneness, 10 to 20 minutes

How long does bacon cook at 425?

Preheat oven to 425 degrees. Line a rimmed baking sheet with foil or parchment paper. Arrange the bacon slices in a single layer on the baking sheet being sure not to overlap the edges. Transfer the baking sheet to the oven and bake for 12-15 minutes or until the desired degree of doneness.

How long does bacon go in the oven at 400?

18-20 minutes

Can you cook bacon at 500?

As for actually cooking the bacon, I oven-fried baking sheets of bacon on the middle rack at temperatures ranging from 300 to 500 degrees (preliminary testing suggested that higher and lower rack levels lead to uneven cooking).

How many calories are in a pound of sliced ham?

There are 885 calories in 1 pound of Ham (Center Slice, Country-Style, Lean Only, Cured).

Is ham good for weight loss?

Sliced ham clocks in at 1.2, giving it a low calorie density. Thus, it may be a good protein to eat in moderation if you’re trying to lose weight. Still, water-rich foods with a low calorie density, such as fruits and vegetables, make even better choices for weight loss ( 39 ).

How many calories are in a pound of cooked ham?

Nutrition summary: There are 807 calories in 1 pound of Ham (Boneless, Regular (Approx 11% Fat), Cured, Roasted).

How many calories are in a fully cooked ham?

Nutrition FactsFor a Serving Size of 3 oz (84g)How many calories are in Ham, Fully Cooked? Amount of calories in Ham, Fully Cooked: Calories 100Calories from Fat 36 (36%)% Daily Value *How much fat is in Ham, Fully Cooked? Amount of fat in Ham, Fully Cooked: Total Fat 4g-11 more rows

How many calories are in a slice of sliced ham?

Nutrition summary: There are 807 calories in 1 pound of Ham (Boneless, Regular (Approx 11% Fat), Cured, Roasted).

How many calories are in 2 slices of deli meat ham?

There are 34 calories in 1 slice of Deli Sliced Ham.

How many calories are in a half pound of sliced ham?

There are 68 calories in 2 slices of Deli Sliced Ham.

Is ham a good weight loss food?

Sliced ham clocks in at 1.2, giving it a low calorie density. Thus, it may be a good protein to eat in moderation if you’re trying to lose weight. Still, water-rich foods with a low calorie density, such as fruits and vegetables, make even better choices for weight loss ( 39 ).

Can ham make you gain weight?

Sausage, bacon, ham and other processed meat is a major contributor to weight gain.

Is ham healthy or not?

Lunch meats, including deli cold cuts, bologna, and ham, make the unhealthy list because they contain lots of sodium and sometimes fat as well as some preservatives like nitrites.

What meat is good for weight loss?

What Are The Best Lean Meats For Weight Loss?

• Grass-Fed Beef. Meat from cattle has the high-quality proteins and essential amino acids needed for a strong and healthy body.
• Chicken.
• Pork Tenderloin.
• White-Fleshed Fish.
• Salmon And Other Fatty Fish.
• Tuna.
• Rabbit.
• Venison.

Is cooked ham healthy for weight loss?

There are 885 calories in 1 pound of Ham (Center Slice, Country-Style, Lean Only, Cured).

How many calories in a half a pound of cooked ham?

Nutrition FactsFor a Serving Size of 3 oz (84g)How many calories are in Ham, Fully Cooked? Amount of calories in Ham, Fully Cooked: Calories 100Calories from Fat 36 (36%)% Daily Value *How much fat is in Ham, Fully Cooked? Amount of fat in Ham, Fully Cooked: Total Fat 4g-11 more rows

How many calories are in a whole cooked ham?

There are 1116 calories in 1 pound of Ham (Whole, Cured). * The % Daily Value (DV) tells you how much a nutrient in a serving of food contributes to a daily diet.

Is cooked ham good for weight loss?

Sliced ham clocks in at 1.2, giving it a low calorie density. Thus, it may be a good protein to eat in moderation if you’re trying to lose weight. Still, water-rich foods with a low calorie density, such as fruits and vegetables, make even better choices for weight loss ( 39 ).

How many calories are in a slice of cooked ham?

Amount Per ServingCalories 70Calories from Fat 20% Daily Value*Total Fat 2.5g3%Saturated Fat 1g5%7 more rows

How many calories are in 2 oz of cooked ham?

There are 154 calories in 2 ounces of boneless, cooked Fresh Ham.

How many calories are in 2 thin slices of deli ham?

There are 68 calories in 2 slices of Deli Sliced Ham.

How many calories are in a thin slice of ham?

There are 55 calories in 2 very thin slices, shaved slice of Deli Sliced Ham.

How many calories is a slice of cooked ham?

There are 57 calories in 1 thin slice of Fresh Ham. * The % Daily Value (DV) tells you how much a nutrient in a serving of food contributes to a daily diet.

How many calories are in a slice of ham lunch meat?

There are 55 calories in 2 very thin slices, shaved slice of Deli Sliced Ham.

How many calories are in 2 large slices of ham?

There are 34 calories in 1 slice of Deli Sliced Ham.

How many calories are in 3 slices of lunch meat ham?

There are 91 calories in 1 serving 2 slices of Sliced Ham.

How many calories are in a pound of ham slices?

There are 885 calories in 1 pound of Ham (Center Slice, Country-Style, Lean Only, Cured).

How many calories are in a serving of sliced ham?

There are 34 calories in 1 slice of Deli Sliced Ham.

What temperature is 180 Celsius in Fahrenheit?

356xb0 Fahrenheit

What is 200c/180c in Fahrenheit?

180 degrees celsius is equal to 392 fahrenheit. A fast oven range is 200 to 220 c is equal to 400 – 450 fahrenheit. Thus, 200 f is the corresponding value of 93.333 c.

How many degrees is 180?

To Convert Fahrenheit to Celsius Subtract 32, multiply by 5, then divide by 9 To Convert Celsius to Fahrenheit Multiply by 9, divide by 5, then add 32.160 degrees F71.1 degrees C170 degrees F76.7 degrees C180 degrees F82.2 degrees C190 degrees F87.8 degrees C39 more rows

Is 180 Celsius hot or cold?

Describing Temperatures A moderate oven temperature is often a range of 180 to 190 C (350375 F), and a hot temperature is above 200230 C (400450 F).

What is 180 degrees for baking?

To Convert Fahrenheit to Celsius Subtract 32, multiply by 5, then divide by 9 To Convert Celsius to Fahrenheit Multiply by 9, divide by 5, then add 32.160 degrees F71.1 degrees C170 degrees F76.7 degrees C180 degrees F82.2 degrees C190 degrees F87.8 degrees C39 more rows

What is 200C/180c in Fahrenheit?

180 degrees celsius is equal to 392 fahrenheit. A fast oven range is 200 to 220 c is equal to 400 – 450 fahrenheit. Thus, 200 f is the corresponding value of 93.333 c.

What temp is 180f?

180 degrees Fahrenheit equals 82.22 degrees Celsius!

What temp is 180 Celsius in Fahrenheit?

356xb0 Fahrenheit

What temp is 200c in Fahrenheit?

We consider the traditional calculation where 200 c equals 392 f. Hence to convert it to f, to calculate the corresponding fahrenheit of 200 celsius, just multiplying 200 into 9/5 then add final value to 32 is equal to 392 f.

What temp is 180 degrees?

To Convert Fahrenheit to Celsius Subtract 32, multiply by 5, then divide by 9 To Convert Celsius to Fahrenheit Multiply by 9, divide by 5, then add 32.180 degrees F82.2 degrees C190 degrees F87.8 degrees C200 degrees F93.3 degrees C210 degrees F99 degrees C39 more rows

What temp is 200 degrees Celsius?

400 degrees F

What is 180 C equal to in Fahrenheit?

356xb0 Fahrenheit

What is 180 degrees when baking?

180 C (350 F) is a moderate oven. It balances: Cooking the food through. Overcooking the outside.

What temperature is 180c in gas mark?

Gasxb0FFan 33251504350160537517064001805 more rows

What’s 180 on a gas oven?

ufeffElectricity Gas Mark1502Moderate16031804Moderately hot19057 more rows

How warm is 180 degrees?

82.2 degrees C

What is 180 Celsius on an oven?

Meaning, 180 C is equivalent to 356 degrees F.

What is 180 degrees on the stove?

Gas markFahrenheitCelsius3338xb0170xb04350xb0177xb04356xb0180xb05374xb0190xb031 more rows

What is 180 C for a fan oven?

Celsius (fan-forced oven)Celsius (conventional oven)Fahrenheit140xb0160xb0325xb0160xb0180xb0350xb0170xb0190xb0375xb0180xb0200xb0400xb04 more rows

What is 180 Celsius in Fahrenheit for baking?

180 C (350 F) is a moderate oven. It balances: Cooking the food through. Overcooking the outside.

What does it mean to bake at 180 fan?

356xb0 Fahrenheit

What is 170 C in Fahrenheit for baking?

170 degrees celsius is equal to 338 fahrenheit. A fast oven range is 200 to 220 c is equal to 400 – 450 fahrenheit.

IS 180 C the same as 350 F?

Answer: 180xb0 Celsius is equal to 356xb0 Fahrenheit.

IS 23 C cold or hot?

To Convert Fahrenheit to Celsius Subtract 32, multiply by 5, then divide by 9 To Convert Celsius to Fahrenheit Multiply by 9, divide by 5, then add 32.180 degrees F82.2 degrees C190 degrees F87.8 degrees C200 degrees F93.3 degrees C210 degrees F99 degrees C39 more rows

What is 180 degrees c in gas mark?

180 degrees celsius is equal to 392 fahrenheit. A fast oven range is 200 to 220 c is equal to 400 – 450 fahrenheit. Thus, 200 f is the corresponding value of 93.333 c.

What can I use in place of clear jel?

How much should you use: In general, Instant ClearJel can be substituted in equal parts as tapioca, cornstarch, or arrowroot.

What is the ratio of cornstarch to clear jel?

Clear Jel is a superior version of cornstarch because it tolerates higher temperatures and works well with all types of ingredients including acidic ones. Use as a thickener in pies, stews, sauces, gravies and pudding. Use 1/4 cup of Clear Jel for every 1 quart of liquid

Is Clear Jel and cornstarch the same?

It is called Clear Jel. You would buy the Cook Type. It is a specially modified cornstarch that does not break down like regular cornstarch or get watery.

Is cornstarch safe for canning?

It’s fine to use flour and corn starch in modern canning recipes. It’s fine to use flour and corn starch as thickener when modern, tested recipes from reputable sources call for it. These recipes have been lab-tested to ensure their safety.

How do I substitute cornstarch for Clear Jel?

Clear Jel is a superior version of cornstarch because it tolerates higher temperatures and works well with all types of ingredients including acidic ones. Use as a thickener in pies, stews, sauces, gravies and pudding. Use 1/4 cup of Clear Jel for every 1 quart of liquid

Can you use Sure Jell in place of clear jel?

Question: Can I ask you if it is safe to use cornstarch as a thickener when canning (say apple pie filling)and do you know if Sure Gel and Clear Gel are interchangeable? Answer: Sure Gel is a pectin.You use it in jams and jellies, whereas Clear Jel is what you want for pies.

Is cornstarch the same as clear gel?

Regular corn starch and Clear Jel are not the same. Cornstarch will break down during the canning process. Clear jel will not. It is the only thickner recommended for canning pie fillings.

How do you make instant Clear Jel?

Instant ClearJelxae: Freezer Jam In a bowl, using a fork, fully mix the sugar and ICJ. Stir in the sugar-ICJ-mixture, optional corn syrup, and lemon juice. ICJ makes a great jam, that’s lower in sugar and calories!

Can you substitute cornstarch for Clear Jel?

Can you substitute tapioca, flour, or cornstarch for Clear Jelxae? No, when canning pie filling, there is no substitute for Clear Jelxae. Other thickeners like cornstarch clump when canning and may interfere with heat being able to reach throughout the jar.

How do you thicken clear gel?

This is generally the preferred type to use in products to be canned. To use Clear Jelxae in a hot dish such as gravy, first mix a small amount in cold water, then add gradually to the hot liquid, mixing constantly. Or, mix everything together while cold, and then heat and stir to thicken

Is Clear Jel and cornstarch the same thing?

Clear Jel is a modified corn starch made to withstand the heat of canning. Use it just like you would flour. The wonderful difference isit stirs in much easier, without clumping. Be sure you purchase the non-instant Clear Jel or regular type Clear Jel.

Can I use cornstarch instead of clear jel?

Can you substitute tapioca, flour, or cornstarch for Clear Jelxae? No, when canning pie filling, there is no substitute for Clear Jelxae. Other thickeners like cornstarch clump when canning and may interfere with heat being able to reach throughout the jar.

Is Clear Jel powder the same as cornstarch?

Clear Jel is a superior version of cornstarch because it tolerates higher temperatures and works well with all types of ingredients including acidic ones. Use as a thickener in pies, stews, sauces, gravies and pudding. Use 1/4 cup of Clear Jel for every 1 quart of liquid.

What is a substitute for Instant Clear Jel?

How much should you use: In general, Instant ClearJel can be substituted in equal parts as tapioca, cornstarch, or arrowroot.

Why is cornstarch not safe for canning?

Other thickeners like cornstarch clump when canning and may interfere with heat being able to reach throughout the jar. Without heat penetrating throughout the jar, yeast, mold, or other harmful bacteria can form.

Can I use Clear Jel instead of cornstarch?

Clear Jel is a superior version of cornstarch because it tolerates higher temperatures and works well with all types of ingredients including acidic ones. Use as a thickener in pies, stews, sauces, gravies and pudding. Use 1/4 cup of Clear Jel for every 1 quart of liquid.

What can be substituted for Clear Jel in canning?

When you’re in the grocery store and you can’t find ClearJel, reach for Tapioca Starch. It’s a thickener like ClearJel that will thicken the mixture and be clearer than the other items. That and arrowroot work.

What is the difference between Clear Jel and cornstarch?

Clear-jel is modified cornstarch and is the secret ingredient that many commercial bakers use in their fruit pie fillings. Unlike ordinary cornstarch, ClearJelxae works well with acidic ingredients, tolerates high temperatures, and doesn’t cause pie fillings to weep during storage.

What is a good substitute for clear jel?

Can you substitute tapioca, flour, or cornstarch for Clear Jelxae? No, when canning pie filling, there is no substitute for Clear Jelxae. Other thickeners like cornstarch clump when canning and may interfere with heat being able to reach throughout the jar.

Can you use cornstarch for canning?

Clear Jel is a superior version of cornstarch because it tolerates higher temperatures and works well with all types of ingredients including acidic ones. Use as a thickener in pies, stews, sauces, gravies and pudding. Use 1/4 cup of Clear Jel for every 1 quart of liquid

Is there a substitute for Clear Jel?

No, when canning pie filling, there is no substitute for Clear Jelxae. Other thickeners like cornstarch clump when canning and may interfere with heat being able to reach throughout the jar. Without heat penetrating throughout the jar, yeast, mold, or other harmful bacteria can form.

Can pectin replace Clear Jel?

Could they be used interchangeably, she asked? Unfortunately, the answer is no. While they both have thickening properties, they act upon the fruit in jams and jellies differently. Pectin is a water-soluble fiber that is divided into very fine particles.

Is Clear Jel and pectin the same thing?

Pectin is for jam and jelly. It’s a plant-based product. And lastly, Clear Jel is a cornstarch for pie fillings. I hope this was helpful.

How do you make Clear Jel?

#NAME?

Can I substitute cornstarch for Clear Jel?

Can you substitute tapioca, flour, or cornstarch for Clear Jelxae? No, when canning pie filling, there is no substitute for Clear Jelxae. Other thickeners like cornstarch clump when canning and may interfere with heat being able to reach throughout the jar.

What should I put in the nest in Dark Souls 3?

More videos on YouTube.Item Placed in NestExchanged Item in ReturnHomeward BoneIron Bracelets, Call Over GestureSeed of a Giant TreeIron LeggingsUndead Bone ShardPorcine ShieldFirebomb, Rope FirebombLarge Titanite Shard24 more rowsx26bull;Mar 25, 2021

What do you give the bird Dark Souls 3?

Dark Souls 3 has a crow’s nest that allows you to trade in items to get different items from a hidden crow perched on the roof of the Firelink Shrine. While it’s possible to reach the crow’s nest without the Tower Key, it’s best to spend 20,000 souls so you can purchase the Tower Key from the Shrine Handmaid.

What do I do with nest on Firelink Shrine?

Before detailing all of the Pickle Pee trade items in Dark Souls 3, it is worth mentioning that players can only make each of these exchanges once per New Game.

What should I drop in nest Dark Souls 3?

In Dark Souls 3, you can drop items such as Small Smooth and Silky Stones, Siegbrau, and certain upgrade materials into the crow’s nest located in the Undead Settlement. These items can be exchanged for valuable rewards like Titanite Chunks, weapons, or consumables. Experimenting with different offerings is key to discovering all possible trades with the crow.

What do you give the birds nest in Dark Souls?

In Dark Souls, you can offer various items to the crow’s nest for potential trades. Common offerings include Prism Stones, Siegbrau, and certain upgrade materials like Titanite Chunks. The crow may exchange these items for unique weapons, consumables, or upgrade materials. Experimentation with different offerings is necessary to unlock all possible trades with the crow.

How many times can you trade with pickle pee?

In Dark Souls 3, players can trade with Pickle Pee, Pump-a-Rum (the crow) a maximum of three times per playthrough. After three trades, the crow will no longer accept items for exchange. It’s important to plan your trades carefully and prioritize items you most desire from Pickle Pee’s offerings.

What do you give the bird at the top of firelink?

Location

• You can find Pickle Pee, Pump-a-Rum on the roof of the Firelink Shrine, after you have obtained the Tower Key from the Shrine Handmaid.
• You can get to the crow without a key if you jump on the roof via a tipped tree on the top of Firelink Shrine. ( Screenshot).
• See this map for details.

What do you do with bird nest in ds3?

In order to successfully trade an item, players need to stand in the nest of the crow and select an item from their inventory. Once selected, players must choose “Leave” in order to place the item in the nest. If the item is one that the crow desires, the object will be replaced by one or more new items.

How do you get picked up by the bird in Dark Souls?

Once your at the turn again continue up the stairs until you see a nest. go into the nest and curl up like a ball. In about 20 seconds the giant crow from the begining of the game will grab you and take you to the undead asylum.

What can I leave pickle pee?

What is the nest on top of Firelink Shrine?

Dark Souls 3 All Pickle Pee Trade Items

• Alluring Skull Hello Carving.
• Avelyn Titanite Scale (3)
• Black Firebomb, Rope Black Firebomb Titanite Chunk.
• Blacksmith Hammer Titanite Scale.
• Coiled Sword Fragment Titanite Slab.
• Divine Blessing Very Good Carving.
• Eleonora Hollow Gem.

How do you give Snuggly the Crow items?

Location

• You can find Pickle Pee, Pump-a-Rum on the roof of the Firelink Shrine, after you have obtained the Tower Key from the Shrine Handmaid.
• You can get to the crow without a key if you jump on the roof via a tipped tree on the top of Firelink Shrine. ( Screenshot)
• See this map for details.

What can I give the bird in Dark Souls 3?

In order to exchange items with Snuggly, one must drop an item in her nest and wait for her response. If she says No, no that no soft that no warm, she won’t accept it. If she does not respond, the item has either been placed outside her nest, or she will accept it.

How many times can you trade crow Dark Souls 3?

Confirm the quantity (just one) and as soon as the menu closes, the trade will be complete – provided Snuggly accepts the item. You must pick the item up immediately; if you leave the area it will vanish forever. You can only perform each trade once per playthrough.

How many times can you trade with snuggly?

IMPORTANT: Only one item is exchanged at a time. Dropping more than one of an item, either separately or in a stack, or dropping different items and trading it away will result in the exchange of only the last item dropped, and the loss of all the excess items, without any additional gain. Only drop one item at a time.

How do you trade with Snuggly the Crow in Dark Souls?

Dark Souls 3 has a crow’s nest that allows you to trade in items to get different items from a hidden crow perched on the roof of the Firelink Shrine. While it’s possible to reach the crow’s nest without the Tower Key, it’s best to spend 20,000 souls so you can purchase the Tower Key from the Shrine Handmaid.

What can you trade with the bird in Dark Souls?

Trade. In order to trade with it/them, drop an item (by selecting ‘leave’ in the item menu) on either the roof nest or the nest in the shrine rafters, and pick up the item she gives you in return.

How do you get picked up by the crow in Dark Souls?

Leave the asylum by going to where you were dropped off and once again, curl up like a ball. The crow will pick you up and take you back to the first nest.

How do you trade with the bird in Dark Souls?

Snuggly (Warm and Fuzzy) is a special Character in Dark Souls and Dark Souls Remastered. Located in the Northern Undead Asylum, she will trade items with you. To trade, drop the item you are offering, then quit your game and reload.

What do you give the bird in ds3?

In Dark Souls 3, you can give items to the crow in the Undead Settlement. Some items commonly traded include Prism Stones, Siegbrau, and Divine Blessings. The crow will exchange these items for unique items, such as Titanite Chunks or rare weapons. It’s advisable to experiment with different offerings to discover all possible trades.

What do you do with the birds nest on top of Firelink Shrine?

Confirm the quantity (just one) and as soon as the menu closes, the trade will be complete – provided Snuggly accepts the item. You must pick the item up immediately; if you leave the area it will vanish forever. You can only perform each trade once per playthrough.

Can you turn off a smoke detector?

You can turn off a fire alarm by pressing its silencing button. However, we don’t recommend removing the device or the batteries.

How do you get a smoke alarm to stop chirping?

How to Reset a Chirping Smoke Alarm

Turn off the breaker controlling the alarm circuit or disconnect the smoke detector from the circuit.

Open the cover and remove the battery.

Press and hold the reset button for 15 to 20 seconds.

Install a fresh battery and reconnect the smoke alarm back to the circuit.

How do I turn off the fire alarm in my house?

Most smoke detector and fire alarm models will include a silence function.Press this, and the beeping will stop. If the smoke detector/fire alarm continues to pick up on smoke after a short period has elapsed, the beeping noise will start again to ensure your safety.

How do you temporarily disable a smoke detector?

Many people consider it a difficult job to do. Most people ask themselves, can I remove a hardwired smoke detector? The answer is you canuff01 If you have to stop the hard-wired smoke detectors from beeping, you must unplug them from the clip and remove the battery

How do you get a smoke alarm to stop chirping without a battery?

To fix your smoke alarm from chirping pointlessly, first discharge the device, use the hush button, and reconnect all the cables. Next, you can try resetting the circuit breaker and your smoke alarm as well.

Can you silence a chirping fire alarm?

Even after the battery has died, the detector maintains a residual charge that will keep the chirp going for at least seven days. To get the device to stop chirping once the battery has been removed, you must drain this residual charge by holding the test button for 15 seconds

How do I stop my smoke alarm beeping every 30 seconds?

Consistent Chirping The battery may need to be replaced. An alarm will chirp every 30 to 60 seconds for a minimum of seven days. With a low battery announcement, disconnect the unit and replace the batteries.

How do I turn my smoke alarm off?

How to Turn Off Your Smoke Detector

Remove the batteries.

Press and hold the silence button, approximately 10-15 seconds, until it stops beeping.

Install new batteries, which will cause a brief beep to indicate the detector is functioning normally.

How do I silence the fire alarm in my house?

Take the smoke detector off its mounting bracket on the ceiling and disconnect the power cable plugged to the smoke detector. Take out its battery, then press the Test button holding it down for 15 seconds. An alarm will sound for a short time, then the alarm will silence.

How do you permanently silence a fire alarm?

These are the steps that you need to follow to reset your fire alarm:

Switch the power off at your circuit breaker.

Take off the smoke alarm from the mounting bracket and unplug the power supply.

Remove the old batteries.

Without installing the new batteries, press and hold the test button for about 20 seconds.

How do you temporarily disable a hardwired smoke detector?

How To Temporarily Silence Alarm

Press the hush/silencing button. It will silence the entire interconnected system.

It will reset in eight minutes, given that the smoke and debris have dissipated. You can press the hush button repeatedly until the air is clean.

To end the hush period, push the test/hush button again.

Mar 24, 2022

How do you disarm a smoke detector?

How to Turn Off Your Smoke Detector

Remove the batteries.

Press and hold the silence button, approximately 10-15 seconds, until it stops beeping.

Install new batteries, which will cause a brief beep to indicate the detector is functioning normally.

How do you silence a smoke detector you can reach?

To stop a smoke alarm, press and hold the reset button in the middle of the alarm. If you don’t know which box triggered the alarm, hold the reset button on all of them. If that doesn’t work, you’ll need to disconnect its power source. For a hardwired alarm, turn off the main circuit breaker in your house.

How do you turn off smoke alarm without battery?

What if My Smoke Alarm Beeps When I Cook?

Don’t take the battery out.

Open a window or door.

Wave a towel at the detector.

Press the silence button.

Move the alarm away from the bathroom or kitchen by several feet.

Mar 24, 2022

How do you stop a smoke detector from beeping without a battery First Alert?

Close the battery drawer fully. If chirping persists, remove residual charge from the old battery. Ensure that your alarm is not expired and in need of replacement. Note: removing the battery or unplugging the alarm will not stop a low-battery chirp.

Will a smoke detector eventually stop chirping?

It is typical for the smoke alarms to go off and sound for a moment (up to 5-10 seconds) when you install a new battery or they are powered up. In case the alarm continues to go off and there is no smoke present, the cause could be: There may not be sufficient battery power.

How do you silence a hard wired smoke detector?

Hardwired smoke detectors (which typically include a backup battery) are subject to similar issues as those that operate on a battery only. However, hardwired units often require resetting after problems are addressed. On most, simply hold the reset button for 15 to 20 seconds to silence the noise.

How do you stop a fire alarm from chirping?

How to Reset a Chirping Smoke Alarm

Turn off the breaker controlling the alarm circuit or disconnect the smoke detector from the circuit.

Open the cover and remove the battery.

Press and hold the reset button for 15 to 20 seconds.

Install a fresh battery and reconnect the smoke alarm back to the circuit.

Can I stop smoke detector chirping without battery?

These are the steps that you need to follow to reset your fire alarm:

Switch the power off at your circuit breaker.

Take off the smoke alarm from the mounting bracket and unplug the power supply.

Remove the old batteries.

Without installing the new batteries, press and hold the test button for about 20 seconds.

How do I get my smoke alarm to stop chirping in the middle of the night?

To fix your smoke alarm from chirping pointlessly, first discharge the device, use the hush button, and reconnect all the cables. Next, you can try resetting the circuit breaker and your smoke alarm as well.

Why does a smoke detector beep every 30 seconds?

Resetting the Alarm

Turn off the power to the smoke alarm at the circuit breaker.

Remove the smoke alarm from the mounting bracket and disconnect the power.

Remove the battery.

Press and hold the test button for at least 15 seconds.

Reconnect the power and reinstall the battery.

Feb 24, 2021

Why does my smoke detector keep beeping even after I change the battery?

Chirping every 30-40 seconds is generally an indication that the battery is running low. If your smoke or heat alarm has a replaceable battery, try replacing the battery with a brand new one. It is recommended to change the batteries in your smoke and heat alarms every 12 months.

Why is my smoke detector beeping every 35 seconds?

Newer smoke alarms keep some errors in the processor. The smoke alarm must clear errors after the battery is changed, but it might continue to chirp even after you change the batteries. This usually occurs in electrical powered smoke alarms with a battery backup

How do I make my smoke alarms shut up?

You can turn off a fire alarm by pressing its silencing button. However, we don’t recommend removing the device or the batteries.

How do I make my smoke detector stop beeping?

Resetting the Alarm

Turn off the power to the smoke alarm at the circuit breaker.

Remove the smoke alarm from the mounting bracket and disconnect the power.

Remove the battery.

Press and hold the test button for at least 15 seconds.

Reconnect the power and reinstall the battery.

Feb 24, 2021

What is CPT code 63650 used for?

Coding Guidelines CPT codes 63650, 63655, and 63661-63664 describe the operative placement, revision, replacement, or removal of the spinal neurostimulator system components to provide spinal electrical stimulation.

Can CPT code 63650 billed twice?

Question: If bilateral spinal electrode are placed percutaneously, 63650, can both be reported? Answer: Yes, if two electrodes are placed, bilaterally, both may be reported.

What is the CPT code for spinal cord stimulator trial?

The Company considers removal (without revision or replacement) of leads and/or pulse generator (CPT Codes 63661, 63662) medically necessary and eligible for reimbursement.

Does Medicare pay for removal of spinal cord stimulator?

Most private insurance companies cover some or all of the costs of spinal cord stimulators. But for those that are on Medicare, it’s not uncommon to wonder if you will be covered. Luckily, there is good news. Traditional Medicare does cover spinal cord stimulators, and the procedures to implant them in the body.

What is a spinal cord stimulator used to treat?

Question: If bilateral spinal electrode are placed percutaneously, 63650, can both be reported? Answer: Yes, if two electrodes are placed, bilaterally, both may be reported.

Does CPT 63650 need a modifier?

Use CPT code 63650 for the permanent percutaneous epidural implantation of the neurostimulator electrode array. This is the same code as used for the temporary lead placement. If placing a second lead, the provider will bill 63650 for the first lead. The second lead is billed using the 59 modifier

What is included in CPT 63650?

Coding Guidelines CPT codes 63650, 63655, and 63661-63664 describe the operative placement, revision, replacement, or removal of the spinal neurostimulator system components to provide spinal electrical stimulation.

Can you have two spinal cord stimulators?

A: Many people suffering from chronic neck and back pain have two stimulators because there is no single stimulator designed to cover both effectively.

Does CPT code 63650 include fluoroscopy?

Fluoroscopic guidance is included in implanting the neurostimulator electrode(s) using CPT code 63650 (Percutaneous implantation of neurostimulator electrode array, epidural).

How do you code a spinal cord stimulator trial?

Trial Spinal Cord Stimulators a SCS Trial Dual you would code L8680 X16.

What is the CPT code for spinal cord stimulator?

* In 2014 a new HCPCS level II code was established: L8679 – Implantable neurostimulator pulse generator, any type.

What is the difference between CPT 63685 and 63688?

CPTxae codes 63685 (insertion or replacement of spinal neurostimulator pulse generator or receiver) and 63688 (revision or removal of implanted spinal neurostimulator pulse generator or receiver) are temporarily removed from the list of services that require Medicare prior authorization when performed in a hospital

How do I bill CPT 63650?

Use CPT code 63650 for the permanent percutaneous epidural implantation of the neurostimulator electrode array. This is the same code as used for the temporary lead placement. If placing a second lead, the provider will bill 63650 for the first lead.The second lead is billed using the 59 modifier

How difficult is it to remove a spinal cord stimulator?

This may require drilling a small window in the bone above the spinal cord. Then, the surgeon makes a second incision near the lower back or buttock to remove the device battery. The procedure takes about 2 1/2 hours and is performed under general anesthesia.

What happens if the spinal cord stimulator doesn’t work?

The researchers also noted that a large subset of patients who experienced spinal cord stimulator failure also experienced high rates of major depression, anxiety, physical or sexual abuse, post-traumatic stress disorder, or drug and/or alcohol abuse.

What is spinal cord stimulator revision?

A spinal cord stimulator (SCS), also known as a dorsal column stimulator, is a device surgically placed under your skin to send a mild electric current to your spinal cord. Revisions are surgeries to remove the old implants and replace them with new components

What is the annual cost for maintenance and upkeep of my spine stimulator?

Another study[4] published in the Journal of Neurosurgery: Spine finds the costs per patient to be $32,882 under Medicare and $57,896 under Blue Cross Blue Shield , with annual maintenance per patient of $5,071- $21,390, depending on whether complications are present.

Why would you need a spinal cord stimulator?

Spinal cord stimulation can be used to treat patients with severe, chronic pain due to a variety of conditions, including failed back surgery/arachnoiditis, neuropathic pain/neuropathy and complex regional pain syndrome/reflex sympathetic dystrophy.

What type of pain is spinal cord stimulation primarily used for?

Spinal cord stimulation may be used to treat or manage chronic pain caused by: Back pain, especially back pain that continues even after back surgery (failed back surgery syndrome)Heart pain (angina) untreatable by other means. Injuries to the spinal cord

When is a spinal cord stimulator recommended?

Spinal cord stimulation is recommended when other treatments have not been successful, when surgery is not likely to help, or when surgery has failed.

Who needs a spinal cord stimulator?

Patients selected for SCS usually have had chronic debilitating pain for more than 3 months in the lower back, leg (sciatica), or arm. They also typically have had one or more spinal surgeries. You may be a candidate for SCS if : Conservative therapies have failed.

Can CPT code 63650 be billed twice?

Question: If bilateral spinal electrode are placed percutaneously, 63650, can both be reported? Answer: Yes, if two electrodes are placed, bilaterally, both may be reported.

How do you charge a spinal cord stimulator?

Fluoroscopic guidance is included in implanting the neurostimulator electrode(s) using CPT code 63650 (Percutaneous implantation of neurostimulator electrode array, epidural).

Is L8680 included in 63650?

Based upon Medicare policy, HCPCS code L8680 is no longer billable in the office or non-facility setting because it is included in the payment for procedure code 63650: therefore, the respondent’s denial of payment is supported and reimbursement is not recommended.

What is included in a neurostimulator system?

Use CPT code 63650 for the permanent percutaneous epidural implantation of the neurostimulator electrode array. This is the same code as used for the temporary lead placement. If placing a second lead, the provider will bill 63650 for the first lead.The second lead is billed using the 59 modifier

Is Flex Seal harmful to birds?

Is Flex Seal Safe for Birds? Yes, the short answer is that flex seal is safe for use around birds and in bird baths but only if it is cured before birds have access to it. It may be toxic if not properly cured. Flex seal dries within 3-4 hours but requires an entire day to cure completely.

Is Flex Seal toxic for bird bath?

Bird baths can be sealed using non-toxic safe sealers such as polyurethane sealers. Other sealers that are safe for bird baths include those sold by Gorilla, Flex Seal, Krylon, and Rust-Oleum. However, these sealers for bird baths are only safe once they are fully cured

How do you seal a leaky bird bath?

If cracks are letting the water out, you can fill and seal them. Silicone caulk fills cracks permanently, and it comes in tubes that make application easy. Be sure to do this in a warm and well-ventilated place. The caulk may smell bad for a couple of days, but after it dries thoroughly, it’s harmless to birds.

Is Flex Seal toxic to animals?

A: Yes, Flex Seal Liquid is safe around plants and animals (once fully cured).

Is silicone sealant safe for bird baths?

Bird baths can be sealed using non-toxic safe sealers such as polyurethane sealers. Other sealers that are safe for bird baths include those sold by Gorilla, Flex Seal, Krylon, and Rust-Oleum. However, these sealers for bird baths are only safe once they are fully cured

What concrete sealer is safe for birds?

You can use a food-grade silicone aquarium caulk sealant to fill cracks if needed. This is non-toxic, it does not contain mildewcides or leach any chemicals once cured, so it won’t harm the birds.

How do you seal a leaking stone in a bird bath?

The Wear-Tek 4400 is a durable coating that will not delaminate, peel or yellow since it is extremely UV resistant. It will also make organic growth easy to clean and will keep water from seeping through the concrete itself. Once cured the coating is safe and non-toxic for wildlife and birds.

What sealant is safe for bird baths?

Bird baths can be sealed using non-toxic safe sealers such as polyurethane sealers. Other sealers that are safe for bird baths include those sold by Gorilla, Flex Seal, Krylon, and Rust-Oleum. However, these sealers for bird baths are only safe once they are fully cured.

What do you use to seal a cement birdbath?

If cracks are letting the water out, you can fill and seal them. Silicone caulk fills cracks permanently, and it comes in tubes that make application easy. Be sure to do this in a warm and well-ventilated place. The caulk may smell bad for a couple of days, but after it dries thoroughly, it’s harmless to birds.

Is Flex Seal non toxic?

Tung oil, also called china wood oil, is an all-natural, food-grade compound that’s safe to use on concrete and stone birdbaths. It will help to waterproof the birdbath and help prevent cracking and pitting.

Can Flex Seal be used on concrete bird bath?

Yes, Flex Seal liquid is safe to repair your bird bath with, once it’s been fully cured that is. Flex Seal will usually dry to the touch in about 3 to 4 hours and will be fully cured in 24 hours.

How do I fix a leak in my concrete birdbath?

Birdbaths and fountains are frequently constructed out of concrete and should be treated with a concrete sealer in order to presevere their life, prevent cracking, water penetration and organic growth such as mold and mildew.

Is Liquid Flex Seal non toxic?

The rubber sealant expands and contracts and is paintable. Flex Seal Liquid is non hazardous, non toxic, non flammable, and UV resistant, safe for plants and animals.

Is dried Flex Seal toxic?

Yes, Flex Seal can be toxic to humans especially to young children. The central nervous system may be compromised by overexposure to this product, so any time you feel you are having a reaction to or an illness due to this product, you should seek medical attention.

Is Flex Seal spray toxic to fish?

Q: Is Flex Seal Liquid safe to use on a fishpond with live fish? A: Once fully cured, Flex Seal Liquid is safe around plants and animals.

Is silicone safe for bird bath?

Silicone caulk fills cracks permanently, and it comes in tubes that make application easy. Be sure to do this in a warm and well-ventilated place. The caulk may smell bad for a couple of days, but after it dries thoroughly, it’s harmless to birds

How do you waterproof a birdbath?

Bird baths can be sealed using non-toxic safe sealers such as polyurethane sealers. Other sealers that are safe for bird baths include those sold by Gorilla, Flex Seal, Krylon, and Rust-Oleum. However, these sealers for bird baths are only safe once they are fully cured.

Is Flex Seal safe to use on a bird bath?

Yes, Flex Seal liquid is safe to repair your bird bath with, once it’s been fully cured that is. Flex Seal will usually dry to the touch in about 3 to 4 hours and will be fully cured in 24 hours.

What sealant is safe for birds?

Polyurethane is safe for bird baths as a waterproof sealant. Polyurethane is non-toxic and eco-friendly in nature that is not harmful to birds, plants, and other animals. Polyurethane is safe to be applied as a sealant after a double-coated paint job on a bird bath.

What do you use to seal a cement bird bath?

If cracks are letting the water out, you can fill and seal them. Silicone caulk fills cracks permanently, and it comes in tubes that make application easy. Be sure to do this in a warm and well-ventilated place. The caulk may smell bad for a couple of days, but after it dries thoroughly, it’s harmless to birds.

How do you waterproof a concrete bird bath?

Is Flex Seal Safe for Birds? Yes, the short answer is that flex seal is safe for use around birds and in bird baths but only if it is cured before birds have access to it. It may be toxic if not properly cured. Flex seal dries within 3-4 hours but requires an entire day to cure completely.

How do you fix a leak in a stone bird bath?

Tung oil, also called china wood oil, is an all-natural, food-grade compound that’s safe to use on concrete and stone birdbaths. It will help to waterproof the birdbath and help prevent cracking and pitting.

Can flex seal be used on concrete bird bath?

Yes, Flex Seal liquid is safe to repair your bird bath with, once it’s been fully cured that is. Flex Seal will usually dry to the touch in about 3 to 4 hours and will be fully cured in 24 hours.

How do you seal a wooden bird bath?

You can use a food-grade silicone aquarium caulk sealant to fill cracks if needed. This is non-toxic, it does not contain mildewcides or leach any chemicals once cured, so it won’t harm the birds.

What can I use to seal a concrete bird bath?

Bird baths can be sealed using non-toxic safe sealers such as polyurethane sealers. Other sealers that are safe for bird baths include those sold by Gorilla, Flex Seal, Krylon, and Rust-Oleum. However, these sealers for bird baths are only safe once they are fully cured.

Is it OK to eat overcooked hard-boiled eggs?

When you boil eggs, hydrogen sulphide – a toxic gas is released in the whites of the egg. This happens especially when you overboil the eggs. If you have noticed, overcooked eggs have a green coating on their yolk, which is a signal that you should not eat them

Are burnt boiled eggs OK to eat?

Yes, it is safe to eat. This green colour is caused by overcooking the egg and is due to the high amounts of sulphur and iron reacting with the surface of the yolk. Can I cook eggs in the microwave?

What is a load and what is an example load?

An electrical load is the part of an electrical circuit in which current is transformed into something useful. Examples include a lightbulb, a resistor and a motor. A load converts electricity into heat, light or motion.

What is source and load?

By definition, a source is a device delivering energy into a system, while a load is a device extracting energy from a system.

What is the function of the load?

The Load function initializes a database and loads it from an input data file. It can be used for initial loading of a database, as part of a database reorganization, or for reloading a database after changing the DBD definition.

What is an example of a load?

The definition of a load is something that a person, animal or thing is carrying. An example of load is furniture stacked into a moving van. Load is defined as to fill something up or to provide with an excess. An example of load is to pile a truck with furniture.

What is a load give 3 examples of a load?

The domestic loads mainly consist of lights, fan, refrigerator, air conditioners, mixer, grinder, heater, ovens, small pumping, motor, etc. The domestic load consume very little power and also independent from frequency. This load largely consists of lighting, cooling or heating. 2.

What are examples of load devices?

An electrical load is a device or an electrical component that consumes electrical energy and convert it into another form of energy. Electric lamps, air conditioners, motors, resistors etc. are some of the examples of electrical loads.

What are three different examples of loads?

If we look at the nature of electrical load, we can classify them into 3 types.

What is source and load in a circuit?

The source side of the circuit includes all parts of the circuit between the positive side battery post and the load. The load is any device in the circuit that produces light, heat, sound or electrical movement when current is flowing. A load always has resistance and consumes voltage only when current is flowing.

What is load in circuit?

An electrical load is simply any component of a circuit that consumes power or energy. In a household setting, the most obvious examples of electrical loads include light bulbs and appliances.

What is source in circuit?

A Source is a device which converts mechanical, chemical, thermal or some other form of energy into electrical energy. In other words, the source is an active network element meant for generating electrical energy. The various types of sources available in the electrical network are voltage source and current sources.

What does source mean in electricity?

An electrical source is a device that is capable of converting non-electrical energy into electrical energy. An example of this is a battery that can convert chemical energy into electrical energy. This then leads to the definition of ideal sources. These are sources that does not change even when a load is attached.

What is the function of a load in physics?

Load is a term frequently used in engineering to mean the force exerted on a surface or body.

What is the function of a load in a simple circuit?

The load is any device in the circuit that produces light, heat, sound or electrical movement when current is flowing. A load always has resistance and consumes voltage only when current is flowing.

What is the main function of loading area?

A loading dock or loading bay is an area of a building where goods vehicles (usually road or rail) are loaded and unloaded. They are commonly found on commercial and industrial buildings, and warehouses in particular.

What is the load function in R?

load can load R objects saved in the current or any earlier format. It can read a compressed file (see save ) directly from a file or from a suitable connection (including a call to url ). A not-open connection will be opened in mode rb and closed after use.

What are 4 examples of electrical loads?

An electrical load is a device or an electrical component that consumes electrical energy and convert it into another form of energy. Electric lamps, air conditioners, motors, resistors etc. are some of the examples of electrical loads. They can be classified according to various different factors.

What are 3 different examples of loads?

Three basic types of loads exist in circuits: capacitive loads, inductive loads and resistive loads.

What is an example of a load electricity?

In a household setting, the most obvious examples of electrical loads include light bulbs and appliances. In a more general sense, any resistor or electric motor in a circuit that converts electrical energy into light, heat, or useful motion constitutes a load on the circuit.

Is a battery an example of a load?

An electrical load is an electrical component or portion of a circuit that consumes (active) electric power, such as electrical appliances and lights inside the home. The term may also refer to the power consumed by a circuit. This is opposed to a power source, such as a battery or generator, which produces power

What is a load example?

Three basic types of loads exist in circuits: capacitive loads, inductive loads and resistive loads.

What are some examples of loads?

Here are some common examples of load components:

• Resistors. These components passively convert electrical energy into heat (and light in lamp filaments).
• Motors.
• Appliances.

Dec 20, 2015

What is considered a load device?

Definition: The device which takes electrical energy is known as the electric load. In other words, the electrical load is a device that consumes electrical energy in the form of the current and transforms it into other forms like heat, light, work, etc.

What are the 5 types of electrical loads?

The Different Types of Electrical Load

• Resistive Load. Any load that consists of a heating element is generally referred to as a resistive load.
• Inductive Load.
• Capacitive Load.
• Domestic (Residential) Load.
• Commercial Load.
• Industrial Load.
• Municipal Load.

What is the load in circuit?

By definition, a source is a device delivering energy into a system, while a load is a device extracting energy from a system.

What is load and supply?

Load is the portion of the supply used to power your appliance or light bulb. It’s the usable part of the electricity flowing through the circuit. If you hear the term demand in a power supply, it is the same as the load.